Monitoring and Control

Ensto switchgear controllers is a smart equipment for MV/LV distribution sub-stations and MV overhead lines. These controllers can manage up to 8 channels of underground network or a single overhead switch, it can measure current and detect faults (power surges and earth faults) for impedance-earthed and compensated networks. It can be operated locally or remotely via a SCADA system using communication protocols set out in this document, by means of a cyber-secure VPN tunnel. Ensto switchgear controllers have been developed to meet the new requirements of smart grids.

Main benefits:

• Compliance with key communication standards (IEC 60870-5-101, IEC 60870-5-104, DNP3, DNP3 IP, communication redundancy)
• Communication via 3G / 4G / digital radio modules / any IP communication media with Ethernet or serial connection (RS232)
• Simultaneous cabinet configuration and communication using three independent Ethernet ports
• Cybersecurity: Protection against cyberattacks through secure communication, secure tunnels (VPN, OpenVPN and IPSec) and secure hardware design 
• Optimize the duration of power cuts (SAIDI)
• Easy to upgrade
• Flexible updates in a secure environment
• Retrofit: Possibility of upgrading a previous generation cabinet (ITI2012, underground or overhead) by simply replacing the  CPU board with the new one (CPU2020) 
• Client update by staff or by Ensto’s Service team 

The distributed generation controllers (D.E.I.E.) is a control and monitoring device that manages the decentralized source of energy generation. 

The product is installed in MV distribution substations and encompasses with all required functionalities to manage properly decentralized production means such as Windmills, Photovoltaic power plant, Micro generation, Gas turbine, Hydraulic generation. Various communication media is available to meet all needs (RTC, RADIO, or IP) according to HNZ and IEC104 protocols.

Ensto’s LYNX 4425 is a current fault detector for MV underground cable networks evolving from  10 to 24 kV and operating with an impedance-earthed or compensated neutral network. 

Its main function is to make more efficient the distribution grid. Indeed when faults are detected and located quickly, the number and the duration of power outages are minimized and resulting to significant savings for distribution networks owner.  

Accurate, reliable fault detection and location with Ensto's LYNX:

• Easy to install a stand-alone device
• Reliable and accurate fault detection
• Long lifetime with super capacitor

In the dynamic landscape of the electrical distribution industry, effective commissioning support is crucial for ensuring the seamless integration and optimal performance of electrical systems. At Ensto, we provide comprehensive commissioning support that seamlessly transitions from factory recipe to site installation. Our process begins with a detailed factory acceptance test (FAT) to ensure all components meet your specifications and industry standards before leaving our facility. 

Once on-site, our expert team conducts rigorous installation procedures, ensuring every element is correctly assembled and integrated. We perform thorough inspections and functional tests to validate the performance of your product and related systems. 

Throughout this process, we emphasize clear communication and documentation, providing you with valuable insights and records for future reference. Our commitment to training ensures that your personnel are equipped to operate and maintain the systems effectively. 

With our end-to-end commissioning support, you can trust that your installation will be completed on time and to the highest standards.  

At Ensto, we understand the importance of reliable support for medium voltage switchgear in the electrical DSO industry. Our dedicated online technical support services ensure that you have access to expert assistance whenever you need it. 

Our team of experienced technicians is available to address your inquiries, troubleshoot issues, and provide guidance on best practices for operation and maintenance. Whether you require assistance with installation, configuration, or performance optimization, we are here to help. 

We offer real-time assistance, ensuring that your operations run smoothly and efficiently. With Ensto, you can count on prompt, knowledgeable support that enhances the performance and reliability of your medium voltage switchgears.  

At Ensto, we offer comprehensive product training for medium voltage switchgear designed specifically for Distribution System Operators (DSOs). Our training programs equip your team with the knowledge and skills necessary to operate and maintain switchgear effectively.

Our experienced trainers provide hands-on sessions that cover essential topics, including installation procedures, operational best practices, and troubleshooting techniques. Participants will gain a deep understanding of the switchgear's features and functionalities, enabling them to maximize performance and enhance safety.

We tailor our training to meet your specific needs, ensuring that your staff is confident in their ability to manage medium voltage systems. Additionally, we provide access to valuable resources such as manuals and materials for ongoing reference.

Investing in product training with Ensto empowers your team, fosters operational excellence, and ensures the long-term reliability of your electrical distribution systems.  

At Ensto, we understand that field issues with medium voltage switchgear can disrupt operations for Distribution System Operators (DSOs). Our technical expertise investigation services are designed to quickly address these challenges and restore system reliability.

When a problem is identified, our skilled team responds promptly to conduct a comprehensive on-site investigation. We assess the situation, analyze system performance, and inspect components to determine the root cause of the issue Leveraging advanced diagnostic tools, we ensure a comprehensive understanding of the situation.

Following our investigation, we provide clear, actionable recommendations to resolve the issue and enhance system performance. Our goal is to minimize downtime and restore operational efficiency.

Count on Ensto for expert investigation services that safeguard the reliability of your electrical distribution systems.  

At Ensto, we proudly hold a company diploma that serves as a testament to our commitment to excellence and reliability in the electrical distribution industry. This diploma reflects our rigorous training programs and adherence to industry standards, assuring our clients of our expertise and professionalism.

Earning this diploma is not just an accomplishment; it symbolizes our dedication to continuous improvement and quality assurance. It provides our clients with confidence in our ability to deliver innovative and effective solutions and related services.

With our diploma, you can trust that we prioritize safety, compliance, and customer satisfaction in every project we undertake. We believe that our qualifications enhance our credibility and reinforce our position as a trusted partner in the industry.