Voltage Controller VC6K-1P-000
Ensto Voltage Controller is a cost-efficient solution for correcting unwanted voltage variation in low voltage 1-phase networks. It is installed close to the consumer connection point, where it measures the feeding line voltage and automatically stepwise increases or decreases the output voltage.
| Code | VC6K-1P-000 |
| GTIN | 6438100321116 |
| Name | Voltage Controller |
| Dimensions | |
|---|---|
| Weight | 30 kg |
| Height | 350 mm |
| Width | 600 mm |
| Length | 400 mm |
| Dimensions l x w x h | 400 x 600 x 350 |
| Electrical values | |
| Number of phases | 1 |
| Operating voltage | 230 V |
| Nominal current A | 25 A |
| Carton | |
|---|---|
| Size | 1 pce |
| Depth | 550 mm |
| Height | 270 mm |
| Width | 660 mm |
| Weight | 31.000 kg |
| Volume | 98.01 l |
| Pallet package | |
| Size | 6 pcs |
| Depth | 1200 mm |
| Height | 960 mm |
| Width | 800 mm |
| Weight | 206.000 kg |
| Volume | 921.6 l |
| Name | Code | GTIN | ||
|---|---|---|---|---|
|
Connector with surge arresterThe design of SE 46.275-15 enables installation on insulated conductor and branch connection, the same connector is used for both. Connector can be installed on insulated Al conductors with cross section range 10 - 95 mm² and Cu conductors with cross section range 1.5 - 70 mm² and branch connection with the same range of conductors. The surge arrester comes with earthing conductor which is 6 mm² Cu wire (1 m) and equipped with M8 cable lug. |
SE46.275-15 | 6438100326685 | See product |
|
Tightening toolCT42 is a special tool which is used for tightening the steel band COT37. |
CT42 | 6418677412332 | See product |
|
Connector with surge arresterSE45.275-15 includes a new piercing connector specially designed for surge arrester. This connector is used when installing the surge arrester on insulated LV overhead lines. It can be installed on insulated Al/Cu conductors with cross section range 10-150 mm². Continuous operating voltage 275 V. The surge arrester comes with earthing conductor which is 6 mm² Cu wire (1 m) and equipped with M8 cable lug. |
SE45.275-15 | 6438100326715 | See product |
|
Steel bandThe band COT37 is used with the buckle COT36 in, for example, attaching band hooks on poles. |
COT37 | 6418677412196 | See product |
|
Steel buckleThe buckle COT36 is used with the band COT37 in, for example, attaching band hooks on poles. |
COT36 | 6418677412189 | See product |
