Cosse mécanique de câble LUG6-50/8LV
The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lug is longitudinally water tight and is suitable for aluminium conductors, both solid and stranded as well as for sector shaped and circular conductors.
| Code | LUG6-50/8LV |
| GTIN | 6438100321895 |
| Nom | Cosse mécanique de câble Al 6-50 mm² ø 8.5 mm |
| Normes | |
|---|---|
| Normes | IEC 61238-1 |
| Informations Techniques | |
| Matériau du conducteur | Al |
| Cross section stranded circular | 6 ... 50 mm² |
| Cross section solid circular | 6 ... 50 mm² |
| Cross section stranded sector | 6 ... 50 mm² |
| Cross section solid sector | 6 ... 50 mm² |
| Dimensions | |
| Poids | 0.039 kg |
| Hauteur | 31 mm |
| Largeur | 20 mm |
| Longueur | 60 mm |
| Conductor hole diameter | 10 mm |
| Palm hole diameter | 8.5 mm |
| Quantity of palm holes | 1 |
| Mécanique | |
| Couple de serrage | 11 Nm |
| Caractéristiques | |
| Classe de tension | 0,6/1 (1,2) kV |
| ETIM | |
| ETIM Class | EC001054 |
| Section nominale aluminium, RM | 6 ... 50 mm² |
| Section nominale aluminium, RE | 6 ... 50 mm² |
| Section nominale aluminium, SM | 6 ... 50 mm² |
| Section nominale aluminium, SE | 6 ... 50 mm² |
| Dimension métrique du filetage de raccordement | 11 |
| Matériau du conduit | Aluminium |
| Traitement de surface | Bare |
| Avec tête cisaillée | Yes |
| Sac en plastique | |
|---|---|
| Taille | 1 pcs |
| Profondeur | 100 mm |
| Hauteur | 10 mm |
| Largeur | 300 mm |
| Poids | 0.139 kg |
| Volume | 0.3 l |
| Carton | |
| Taille | 100 pcs |
| Profondeur | 210 mm |
| Hauteur | 160 mm |
| Largeur | 210 mm |
| Poids | 14.200 kg |
| Volume | 7.056 l |
| Emballage palette | |
| Taille | 7000 pcs |
| Profondeur | 1200 mm |
| Largeur | 800 mm |
| Poids | 1014.000 kg |