Power arc device SDI27.1
Power arc device SDI27.1 is used with SDI90.x composite insulators on angle poles with suspension clamp SO181.6 and on tension poles with tension clamps SO255 or SO256. The package includes arching horns and 95 mm² - 0.45 m conductor with cable lugs. Spark gap is adjusted to 130-230 mm on 24-36 kV.Short-circuit current: Arc test 2 x 10 kA, 1sShort circuit test:I1s=11,5 kA, 1s / Idyn=29 kA
| Code | SDI27.1 |
| GTIN | 6418677419133 |
| Name | Power arc device For tension insulators |
| Dimensions | |
|---|---|
| Weight | 0.83 kg |
| Electrical values | |
| Arc gap | 90 ... 250 mm |
| Nominal voltage (Un) | 12 ... 36 kV |
| ETIM | |
| ETIM Class | EC000490 |
| Type of accessory/spare part | Other |
| Material | Other |
| Surface protection | Other |
| Plastic bag | |
|---|---|
| Size | 1 pce |
| Depth | 350 mm |
| Height | 10 mm |
| Width | 230 mm |
| Weight | 0.839 kg |
| Volume | 0.805 l |
| Carton | |
| Size | 9 pcs |
| Depth | 375 mm |
| Height | 157 mm |
| Width | 250 mm |
| Weight | 7.789 kg |
| Volume | 14.71875 l |
| Pallet package | |
| Size | 486 pcs |
| Depth | 1200 mm |
| Height | 1140 mm |
| Width | 800 mm |
| Weight | 440.628 kg |
| Volume | 1094.4 l |
| Name | Code | GTIN | ||
|---|---|---|---|---|
|
Tension clamp SO257STension clamp for covered conductors PAS/BLL AlMgSi. The insulation piercing contact part has silicone seal which prevents the moisture getting into the conductor. Shear head ensures the correct tightening torque. |
SO257S | 6438100332129 | See product |
|
Tension clamp SO255Tension clamp for covered conductors (PAS/BLL AlMgSi and for insulated messengers of aerial MV cables like AHXAMK-WM3 (Multi-wiski). The insulation piercing contact part has silicone seal which prevents the moisture getting into the conductor. |
SO255 | 6438100303846 | See product |
|
Suspension clamp SO181.6A suspension clamp for AAAC covered conductors. The clamp includes metallic rolls that enable conductor pulling through the clamp. Conductor joints with diameter under 30 mm can be pulled through the suspension clamp. The clamp has waterproof insulation piercing contact part, which can be used for overvoltage protection and to bring the clamp's body to line's electrical potential to prevent partial discharges and radio interference. Suitable for angles up to 90°. Suspension bolt 16 mm. |
SO181.6 | 6418677459849 | See product |
|
Tension clamp SO256STension clamp for covered conductors PAS/BLL AlMgSi. The insulation piercing contact part has silicone seal which prevents the moisture getting into the conductor. Shear head ensures the correct tightening torque. |
SO256S | 6438100324872 | See product |
|
Tension clamp SO256Tension clamp for covered conductors PAS/BLL AlMgSi. The insulation piercing contact part has silicone seal which prevents the moisture getting into the conductor. |
SO256 | 6438100303822 | See product |
